1. 1 x KL14755 30L FermZilla Flat Bottom Fermenter with 24mm Hole for Tap

2. 1 x KL20343 White Fermenter tap Bulkhead with 10mm barb

3 1 x KL01595 Air Lock (Three-piece)

4. 1 x KL01618 Strip Stick On Thermometer

Please note the Black Carry handle lid does not need a seal, it will seal with plastic on plastic.

This fermenter has not been pressure rated and it’s not designed to ferment under pressure, pressure transfer or carbonate in. If you are looking for a pressure rated fermenter that you can carbonate in then we would recommend that you go for the “FermZilla All-Rounder in 30L or 60L” Or “FermZilla Conical Uni Tank in 27L and 55L” models.  For this reason, we have not supplied this tank with a PRV valve and do not recommend putting it under pressure by modification.

WARNING: This fermenter is only rated to temperatures of 45C. Ensure to cool any liquid down to below this temperature before pouring in to the fermenter. If you need to dissolve extract syrup with boiling water, make sure to cover the syrup with sanitised foil or the sanitised lid of the can while cooling and cool down to below 45C in an ice bath for example.

Home Brewing and Beer Making

Wine Making / Racking

Kombucha Fermentation

Spirit Wash Fermentation

35 x 35 x 47cm to top of the accessory port on the lid.

5 Reasons to Get the FermZilla Flat Bottom is Superior to other HDPE and PP Fermenters

1. Super Smooth

The PET is super smooth making it easier to clean.  Other HDPE fermenters have very porous wall meaning krausen sticks to the walls and the holes in HDPE are large enough for bacteria to grow in the wall of the fermenter.

2. Better Oxygen Barrier

Some fermenters like the Coopers type are not even airtight and have a loose-fitting lid allowing oxygen to get into the fermenter easily.

Other fermenters are often made from HDPE that has high gas transmission rate meaning oxygen can pass through the wall of the fermenter

3. Lightweight and strong

The FermZilla fermenters are lightweight but really strong and shatterproof.

4. Convenient Lid Opening Size

The opening at the top is 120mm diameter so its easy to get your arm into clean but also small enough that it’s easy to seal the lid with minimal force.

5. New Lid Design

The new lid design allows you to fit other accessories to the lid easily such as thermowell or glycol coil.