Rigid Stainless Steel Joiner 6.5mm ID x 9.5mm OD (3/8) x 60mm Long
This is particularly useful when using the 9.5mm duotight thermowell tee to provide a rigid join.
Specifications:
Approx. 6.5mm ID
9.5mm tubing with duotight compatible scoring
60mm long
Although it’s possible to make joins using short pieces of 9.5mm OD Evabarrier, we would very much recommend to go a rigid join when going to a larger diameter hosing.
Looking for high quality push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double O-ring sealing design.
Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM O-rings but also use two of them. The double O-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly.
The double O-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.
| Weight | 200 g |
|---|
Brand
duotight
KegLand
Be the first to review “Rigid Stainless Steel Joiner 6.5mm ID x 9.5mm OD (3/8) x 60mm Long”
You must be logged in to post a review.
Related Products
฿35.00
฿160.00
Reviews
There are no reviews yet.