29L Kegmenter with 4-inch Pressure Lid set

Great for fermenting under pressure

Kegmenter ถังหมักขนาด 29L แข็งแรงทนทาน ผลิตจาก Stainless Steel 304 เกรดอาหาร ช่องเปิดด้านบนขนาดใหญ่ 10 เซนติเมตร ช่วยให้ล้างทำความสะอาดง่าย

ขนาด 29L เหมาะสำหรับทำแบช 25L ติดตั้งฝาชุดอุปกรณ์อัดแรงดันได้ด้วย 4-inch Tri-clover clamp

Kegmenter สามารถทนแรงดันได้ 2.5bar (36psi) สามารถหมักภายใต้แรงดันได้ด้วยการติดตั้ง Spunding valve

สามารถถ่ายเครื่องดื่มด้วยระบบปิดได้ เพื่อป้องกัน oxidation

KL09706 BlowTie Spunding Valve Kit (Diaphragm)

จุดเด่นของ 29L Kegmenter

• หมักภายใต้แรงดัน
• ถ่ายเบียร์ออกแบบระบบปิด ลดโอกาสสัมผัสอ๊อกซิเจน (O2)
• Dry hopping แบบ purge O2 ออกก่อน ป้องกัน Oxidation โดยอุปกรณ์ใหม่ชื่อ Hop Bong
• รินเบียร์ออกจากถังมาดื่มโดยตรงเลยก็ได้
• ล้างทำความสะอาดง่าย ช่องเปิดกว้าง 10 cm
• ชิ้นส่วนแข็งแรงทนทาน จัดการง่าย

BrewBuilt Pressure Pack with Floating Dip Tube

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.

This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale (Part: KL05890)

The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can either carbonate naturally with the use of our adjustable pressure relief valve(spunding valve) or if you are using a CO2 gas cylinder you can force carbonate.

Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.

The chimes on the Kegmenters have specifically been designed to be taller than normal chimes so they are high enough to give clearance over the stainless posts on the KL05890 Ball Lock Post Lid. This means the Kegmenters can be stacked. The interlocking stacking chimes means the kegs can be safely stacked up to 4 high.

The Kegmenter can also be used with the 2inch to 4inch tri-clover concentric reducer. This means you can reduce the 4inch opening down to 2 inch opening so you can attach one of our Alcoengine Reflux or Alcoengine Pot still to the top. If you want this part click here KL06156

Pressure Limitations
Maximum Working Pressure: 2.5 BAR
Test Pressure: 5 BAR
Wall Thickness (Body/Chimes): 1.8mm/2.1mm

29L Kegmenter – Great for fermenting under pressure

NOTE: Please be aware that this product is sent without carboard carton. It may arrive with some superficial scratches and small dents as the postal service can be rough with these. The good thing is that they are made of thick stainless steel and can handle this type of treatment but they just might arrive with some cosmetic scratches and scuff marks. This will not change the performance in any way.

Looking at a way to control fermentation temps while fermenting? Our RAPT fermentation chamber would be ideal for our kegmenter range.

If you want to fit a thermowell to the lid of this fermenter then you should really check out this 60cm Stainless Thermowell that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.

29L Kegmenter Specification Sheet