PPSU Sight Glass Upgrade Kit for BrewZilla 65L

ชุดอัพเกรด Sight glass ของ BrewZilla Gen 4 ให้เป็นวัสดุ PPSU ใส แข็งแรง ทนทาน เหนียว ไม่หัก ไม่แตกง่ายๆ

มาพร้อมกับ Graduation Sticker ช่วยให้เราเห็นระดับน้ำ รู้ปริมาตรน้ำในหม้อได้ง่าย

นอกจากนี้ยังช่วยให้เรารู้ปริมาตรได้อย่างง่ายดายเมื่อถ่ายของเหลวออกจากถัง

This upgrade kit suits 65L BrewZilla Gen 3 to 3.1.1 and Gen 4 breweries.

This will enable you to see the liquid level through the incredibly strong and crack resistant PPSU sight glass.

This can be quite handy when you’re sparging to a known level as the malt pipe would normally be sitting on top of the halo ring making it difficult to see the liquid level from the indentation markings inside the BrewZilla.

As this is a one size fits all approach to sight glasses for multiple models and sizes, you will need to cut down the 100cm tubing based on your current BrewZillas recirculation arm size.

We would recommend purchasing a KL14557 Mini Tube / Pipe Cutter to cut the tube cleanly.

We have a video attached down below showing you how to measure and install this on a BrewZilla.

Please note you will need to re-use the Female x 1/2″ Female Camlock on your recirculation arm with this kit.

Do not dispose of it prematurely!

You will also need plumbers KL10888 Teflon tape or food grade loctite for the female camlock x female 1/2″ fitting.

If you need replacement o-rings for your PPSU sight glass please see -> KL33824 (4 Pack) BrewZilla PPSU Sight Glass O-Ring Kit (please note these are only sold in four packs)

Includes:
1 x KL33800 Brewzilla Sight Glass PPSU Tube – 100cm (ID13mm x OD15mm)
1 x KL33817 Brewzilla Sight Glass Stainless Steel Connection Kit (Ball valve & Elbow)
1 x KL33787 BrewZilla – PPSU Sight Glass Graduation Sticker 65L (5-47L ~ 2-12gallons)