KegLand MK4 CO2 Regulator CGA320 Connector

CO2 Regulator จาก KegLand ราคาต่อคุณภาพสุดคุ้ม หัวต่อเป็นแบบ CGA320 ใช้กันทั่วไปในประเทศไทย

สามารถเติม CO2 ได้ง่าย เพราะเป็นหัวมาตรฐานที่ทุกที่เติมในไทยต้องมี

KegLand ยังคงพัฒนาอุปกรณ์ต่างๆ อย่างต่อเนื่อง โดยเน้นที่ราคาเป็นมิตร คุณใช้งานได้อย่างดี

The MK4 CO2 Regulator

by KegLand provides a reading of keg dispensing pressure, as well as an accurate indication of cylinder gas level.

By turning the chrome center knob, you can adjust the dispensing pressure from 0 – 100 PSI.

The MK4 features gauges housed in rubber to protect them from dings, as well as a large 2½” diameter diaphragm so it can both handle several kegs at once if needed, and the large diaphragm also lets you have precise control over the dispensing pressure (which you adjust with the center knob).

¼” flare outlet fits ¼” threaded flare beer lines or use the included Z93 Duotight tubing adapter to fit 8mm outer diameter EvaBarrier tubing.  Includes a 65 PSI replaceable safety relief valve.

This regulator includes two nylon tank sealing washer, and will accept nylon or fiber tank sealing washers.

New and Improved Features

• NEW! duotight 8mm x FFL included as standard – KL06880
• Stronger Steel Gauges made from thicker steel
• Triple scale gauges in kPa, Bar and PSI
• New Colour Coded PRV valves.  This unit comes with a 65psi Green PRV.  It does not come with a Red 35psi or Grey 100psi PRV

As many customers are using pressurisable fermenters such as the KegMenters and FermZilla units this is an important safety feature to make sure lower pressure relief valves are used for some appilcations.

Also being colour coded it’s easy to identify which PRV is fitted.

• New Gauge Guard Available (sold separately)
• New M6 Mounting Holes for easy Mounting

Gauge Guard for KegLand MK4 Regulator

This regulator can be used for a wide range of gasses but for other gas types a different Nut and Stem Is required.

Out of the box this regulator will be suitable for Carbon Dioxide (CO2 and CO2+Nitrogen Mixed Gasses).

However if you want to purchase this regulator for other gas types you can interchange the nut and stem with either a Type 10 or Type 50 as as shown below:

Type 10 Nut & Stem :  Helium, Argon, Oxygen

Type 50 Nut & Stem : Nitrogen